Guide to applying stickers and then clear-coating them. Mind the waiting time between application and clear coat.
Steps
- Preparation: Make sure the surface is clean, dry and free of dust/grease. Clean thoroughly if needed.
- Apply base coat: Apply the desired base coat and let it fully cure as per the manufacturer.
- Apply sticker: Position carefully, press down without bubbles, smooth out folds. Do not move once it adheres.
- Waiting time: Leave the sticker undisturbed for at least 48 hours so solvents can outgas and adhesion reaches full strength.
- Apply clear coat: Stir well and apply evenly over sticker and surrounding area (brush or spray).
- Let dry: Allow to dry completely per product instructions; protect from dust and moisture.
ℹ️
Need multiple coats? Repeat steps 5 & 6, only after the previous coat has fully dried.
Final tips
- Work in a well-ventilated area or outdoors.
- Protect adjacent areas with masking/newspaper.
- Follow the paint product instructions for drying times/thinners.